We Couldn’t Complete The Updates Undoing Changes Fix [2022 Updated]

5/5 - (4 votes)

The “windows 10 couldn’t complete the updates” error is one of the most commonly faced BSOD errors on the Windows OS architecture. It is an infinite loop that does not allow the users to update their Windows. The “Windows 10 we couldn’t complete the updates” error occurs when the Windows updates files are not installed properly. Moreover, the corrupted system files also lead to this error.

Windows OS is the most widely used operating system by users from all across the world. It is an easy-to-use OS and provides a large variety of services to the users. It inhibits a wide range of facilities and in-built tools that are capable of solving all your issues. The Windows OS gets regular updates that fix all the bugs encountered. The updates are important to keep your Windows safe from viruses and other harmful threats. 

The updating process is way simpler than any other process. The entire process runs in the background and does not demand the interference of the users. But if the updates are larger, then they may probably ask you to update your device. In some situations, you may encounter the ”Windows 10 we couldn’t complete the updates undoing changes” error. You will get this error infinite times displayed on the blue screen. The users will no longer be able to boot up their devices. This is the most infuriating stage where the users are unable to use their devices properly. So, each one of you must get rid of this BSOD error as soon as possible. Let us discuss the error, in brief, using various subtopics.

Cause of We Couldn't Complete The Updates Undoing Changes:

windows 10 we couldn't complete the updates

When you encounter Windows 10 we couldn’t complete the updates error, it is necessary to figure out the cause of this error. There are various reasons for the cause of the windows 10 couldn’t complete the updates. Let us discuss some of the major ones in detail. 

  • Incomplete Downloads: The root cause of this error is the incomplete Windows update download. Whenever you try to download a Windows update and the process is being disturbed, there are chances that the file may remain incomplete. Hence, these incomplete files are the cause for which we couldn’t complete the updates to windows 10.
  • Insufficient Disk Space: The regular Windows update consumes a fixed amount of disk space storage to complete the process. Thus, it is necessary to have some extra free space while downloading any of the new updates. Having insufficient storage space can also cause the Windows 10 couldn’t complete the updates error.
  • Corrupted System Files: The system files are responsible for the internal processing of the system. If any of these files that are used for updating, are corrupted or have been damaged due to any reason, then you are likely to face the “we couldn’t complete the updates undoing changes” error.
  • Group Policy Error: If your device has a joint domain with other servers and is configured using the Windows server updates services, then any of the errors occurring in these services may cause the error. Some of the faulty group policies can also lead to the “we couldn’t complete the updates windows 10 situation.

Methods to Fix We Couldn't Complete The Updates Undoing Changes Error:

Once you have identified the cause of the windows 10 couldn’t complete the updates error, you now have to select a perfect method that would discard the error from your device. So, here are some of the best working solutions that will solve this error.

Run Windows Update Troubleshooter

The first and the simplest way is to run the Windows Update troubleshooter. Whenever you get stuck in such a situation, you should always go for the troubleshooter as the priority method. The troubleshooter is a unique feature in itself that holds various in-built software that is used to resolve various problems depending upon their cause. Similarly, there is a Windows update troubleshooter used to fix the update issues. So here are the steps to use it-

  • Use the Windows + I keys from your keyboard to open the “Setting” window of your device.
  • From the displayed options, click on the “Update and security” option.
  • From the next window, search for the “Troubleshoot” option from the drop-down menu located on the left side.
  • Now, select the Windows update tab and click on the Run the troubleshooter option.

  • The troubleshooter will now start the process on its own. It will detect all the error-causing areas.
  • The entire result of scanning will be displayed on the screen. Check out all of them and then apply the solutions.

Restart The Windows Update And Dependent Services

If any of the Windows updates, app readiness, and background intelligent transfer does not respond accurately, you can fix it. All these services are to be handled with care. If you face any of these errors, then your system would probably be unfit for use.

You can try restarting your device and check for the startup processes. Here are the steps to be performed.

  • Press the Windows + R shortcut keys to start the run window on your device.
  • Type “services. msc” and then click on the “Enter” button.

  • Search for the Windows update option and then right-click on it to open the menu bar.
  • Now click on the “Properties” option from the drop-down menu.
  • In the next window, go to the “General” tab and then select the “Startup type” option.

  • Select the option of Automatic startup (also known as a delayed start).
  • Check out the “Service Status” option. If it is disabled and is marked as “Stopped”, then you should enable it by clicking on the “Start” button.
  • Click on the “Apply” button and exit the window.
  • Perform the above same steps for “App readiness” and background intelligent transfer as well.
  • Once done, try rebooting your device and then work for the Windows update. If you can use the updates then it is well and fine. But if you are unable to use it, then you should proceed to the next method.

Turn Off The Network List Service

The network list service is an in-built service system that is required to track records of the Wifi networks or the networks that your device gets connected to. The Windows update services often cause errors if Windows 10 couldn’t complete the updates. 

  • Open the run command prompt using the Windows + R keys, type services. msc and click on “Enter”.
  • Search for the network list service.
  • Now double click on this option and select the “Properties” option from the displayed drop-down menu.

  • From the General tab, click on the “Startup type” option and set its value to disabled.
  • If the network services are still active, click on “Stop” to halt them.
  • Now click on the “Apply” button to save all the recently made changes.
  • Once done, restart your device and check if the error still exists. By now, it must have been removed. Still, if it continues, move on to the next steps.

Use Windows Update Diagnostics

The Windows Update Diagnostic is another tool that is used to deal with Windows update issues. It is designed by Microsoft to troubleshoot the issue. So, here are the steps to use the Windows Update Diagnostic tool to eliminate the error from your device.

  • First of all, log in to the Windows 10 device using the account of the admin
  • Visit the official website of the Windows update diagnostic tool and run it using the procedure mentioned there.
  • Start using the tool, and in the displayed window, click on the first option. That is the Windows update option.

  • Now click on the Next button and then follow the on-screen instructions to proceed with the process.
  • This will enlist all the issues and will even fix them correctly. Once all the fixes are done, start the Windows update diagnostics for the second time.
  • Now click on the second option i.e. windows update diagnostic and then click on next. 
  • You now have to perform several tasks guided by the tool itself. Again follow the on-screen instructions and complete the entire process.
  • Once you are done with all this, try to restart your device.

You will now be able to get access to the Windows update. So, install all the remaining updates on your device. In case, you are still not able to get the updates, move on to the next method.

Delete the Software Distribution Folder

Every Windows system has an in-built Software distribution folder that consists of all the storage files of your device. It mainly stores all the Windows update files of your device. So, precisely this folder is very important for the updating process. If this folder gets corrupted or damaged due to any reason, then you may surely face this error.  In this situation, you have to clear the folder by deleting all the files present in it. Here are the steps that you should perform to delete them. 

  • You first have to disable some of the Windows Update services. For this, use the Windows + X shortcut keys to open the command prompt on your device.
  • Now, in the command prompt type the following commands given below. 
  • net stop wuauserv
  • net stop bits
  • net stop cryptSvc
  • net stop msiserver
  • After writing all these commands, visit the Windows explorer and search for the below address.

C:\Windows\SoftwareDistribution

  • Once you have located the above address, you can now delete all the files residing in this folder.
  • You can now reactivate all the services back to their normal usage. For this, you have to run the following commands again.

net start wuauserv

net start bits

net start cryptSvc

net start msiserver

  • After you are done with all the above steps, you can now restart your device and check for the windows updates.

Turn On App Readiness Services

The App readiness is an in-built system service that helps you to get your Windows to update smoothly and quickly. It should be turned on while you are updating your Windows. Let us understand the steps for how to turn on the app readiness services-

  • Open the run command by clicking on the Windows + R to use the run command directly.
  • In the command window, type the “services.msc” command and click on the “Enter key”.
  • In the services option window, you will see a list of all the system services provided to you.
  • From the entire list, navigate the app readiness services option and click on it.
  • Now, double-click on the option and click on the “Properties” section to go to the properties window.
  • In the next window, go to the start type tab and set its value to automatic.
  • After this, click on the start button to start running the services.
  • Once you are done with all the changes, click on the “Apply” button to save all these changes and then click on “OK”.
  • Now, restart your device to visualize the after-effects of all these changes.

Try to update your Windows. You may now be able to update your windows without an error.

Check The Free Disk Space

All the Windows updates require a fixed amount of disk space for your device. If your device fails to provide that sufficient storage space, then your device is more likely to face windows 10 we couldn’t complete the updates BSOD error. Thus, you should always keep a constant check on the disk space of your device. You can even add some extra storage to your Windows using a built-in tool called Disk management. Here are the steps to use the disk management tool.

  • Open the Run command window through the Win + R shortcut keys.
  • On the command window, type diskmgmt.msc and then click Enter.
  • Now, select a disk drive and then right-click on it, and then click on the Shrink Volume option.

  • In the next window, you can select the appropriate volume for your disk space. You can even select the volume size from the given options.

  • Now select the C drive and then right-click on it to view the drop-down menu.
  • From the menu, click on the “Extend volume” option.
  • Mention the new size that you have selected earlier.
  • Then save all the recently made changes.
  • Once done, you can restart your device and try updating your Windows.

If you do not want to follow the entire process, you can use an alternative. You can set the disk space free by removing unwanted files, and other folders that end up consuming extra storage space. You can even transfer all of this data to your external disks. The data can either be uploaded on the cloud as a backup.

If you have a pile of junk files and other documents, you can clean it using any of the third-party cleaning applications that will help you to remove the unwanted data within a couple of minutes.

Check Your Device Drivers

The missing or the corrupted drivers often lead to the “windows 10 we couldn’t complete the updates undoing changes” error while updating your Windows. It prevents further upgradation. Thus, you should fix the problem by analyzing the device drivers instantly. 

Reinstall the Corrupted Drivers:

  • Go to the start button and then go to the Device Manager.
  • Check for the list of all the device drivers.
  • The yellow exclamation mark indicates that a particular driver is missing.
  • Right-click on that device and try to uninstall it.
  • Click on the uninstall device option and delete it.

  • Once the driver is uninstalled, right-click on the device and check for the hardware changes. Scan the process.
  • Now, restart your device and set the windows to update the missing drivers automatically.

Update the Device Drivers:

  • Click on the start button and open the device manager.
  • Now choose a particular device with some outdated drivers.
  • Then select the device and click on the “Update driver” option.
  • Here you will find two options on the screen. Either you want your device to search for the updates. Or you want to select the updates manually.

  • Click on the first option of “Select automatically for updated driver software”.
  • If you are unable to find the updates on your own, select the other option.
  • Now, restart your device and check for the updates.

Frequently Asked Questions:

In the next section, we will be discussing some of the most commonly asked questions. More precisely, these questions depict the doubts of the users. We have enlisted some of the important questions that will help you to get a better understanding of the “we couldn’t complete the updates undoing changes windows 10” error.

  • Is the windows 10 we couldn’t complete the updates error causing damage to my device?

The error that you face while updating Windows is the “we couldn’t complete the updates windows 10” error. Although it is not harmful still, this BSOD error needs to be eliminated from your device. Whenever your system is caught by this error, you will no longer be able to update your windows efficiently. You have to use your Windows device with the previous versions only. You cannot upgrade it to the latest version. But in some situations, you may detect the presence of viruses and other malware on your system. It’s better to get rid of the error in its early stage. 

  • How can I resolve the “windows 10 we couldn’t complete the updates undoing changes” error occurring on my device?

You can resolve the “windows 10 couldn’t complete the updates” error in many ways. Some of the most suitable and prominent ways through which you can fix this error are as follows-

  • Run the Windows update troubleshooter
  • Empty the software distribution folder
  • Turn on app readiness services
  • Manually install the update
  • Perform a system store
  • Restore the windows update and dependent services
  • Turn off Network list service
  • Configure group policy settings

          Each of these methods is briefly discussed in the above section. Pick out a suitable method and follow all the steps.

  • Is it safe to disable the fast startup process?

Yes, it is extremely safe to disable the fast startup process on your device. The fast startup feature is used only to speed up the start and the shutdown process of your device. When you start the device, it lights up immediately without any intermediate process. The same scenario is with the shut-down process. Sometimes, it leads to the occurrence of some BSOD errors.

Also Read : Kernel Power 41

Conclusion

The BSOD errors have always been infuriating to each one of us. They impose several constraints on the users that make it annoying to use the affected device. Thankfully, we have got the solutions to your problem. The above sections include every possible method that will help you to resolve the problem of windows 10 we couldn’t complete the updates undoing changes. The error may cause inconvenience to the users as it will not be able to permit new Windows updates. 

Thus, your system will lack access to the new features and facilities available in the new updates. So, it is better to remove this BSOD error to update your device easily. On this note, we would like to conclude this article. Don’t forget to drop your queries in the comment section now. All your doubts and discussions are welcomed.

Sean

Sean

My name is Sean and I started this project in 2020. It has been growing ever since. I am a serial tech entrepreneur and a tech geek. My experience in blogging and technology helps me understand what type of content people are looking for and I intend to provide the information in the best possible way.

Leave a Comment

Your email address will not be published.

Sign up for our Newsletter

Don’t miss new updates on your email !

Scroll to Top